K3S is more economical and streamlines
A brand-new Android keyboard terminal with improved battery life is called iData K3S. K3S is more economical and streamlines worker operations. It offers workers in various industries more effective operation options with the right angle and dip angle modes. It is possible to increase the effectiveness of enterprise management with the help of iData K3S.
Features
The dip angle version is available, perfect for scan and verification
There are two options: right angle and dip angle. The dip angle version’s scan engine has a sliding range of up to 28°, which is beneficial for workers who need to confirm or verify results after scanning. Without changing the angle, they can read and scan simultaneously.
180° screen flip design for easy downward scanning
When using the right-angle version, the screen will flip 180 degrees so that workers can verify and check scanning information when scanning barcodes located in the lower portion of the shelves. In order to scan quickly, the workers must hold the device upside down while sorting, taking inventory, etc.
New ergonomic design, comfortable and easy
Workplace comfort and ease are enhanced by the ergonomic keyboard layout and grip texture. Workers are able to complete all tasks with ease, including scanning while holding the device upside down or entering confirmation. Additionally, you can use the K3S keypad and touch control while wearing gloves.
K3S Technical Specifications
System Configuration
| Processor | Octa-core 2.0GHz high-performance processor |
| Operating System | Android 11.0/Android 12.0 |
| Memory (ROM + RAM) | 32GB + 3GB (standard) |
| SIM | Single SIM card |
| Expansion Slot | Micro SD card (up to 256 GB) |
| Display Screen | 4-inch, resolution: 800*480 pixels |
| Touch Screen | Industrial capacitive screen, support wet-hand operation/glove mode/multi-touch/gesture operation |
| Camera | 8 megapixels of rear camera, support auto-focusing/PDAF |
| Flashlight | 800mA flashlight |
| Keypad | 30 keypads: front key*26, side scan key *2, side power key *1, side custom key*1 |
| Battery | 3.85V lithium battery, with 5000mAh, detachable |
| Audio | Built-in microphone |
| Charging Method | Type-C charging and pin port charging, support 18W fast charging |
| Reminder | High-power speaker/Vibration reminder/LED reminder |
| Vibrating Motor | Built-in vibrating motor |
| Sensors | G-sensor/ Proximity sensor/Light sensor |
| Intercom Function (Optional) | Support one-button PTT calls |
Structure Parameter
| Dimension (L*W*D) | 162mm*68mm*19mm（the thickest part of dip-angle version is 29.4mm） |
| Weight | 278g (including the battery) |
Environmental Parameter
| Working Temperature | -20℃ – 60℃ *Do not charge under low-temperature conditions for the safety concerns |
| Storage Temperature | -40℃ – 70℃ (without the battery) |
| Humidity | 0 – 95% (no moisture condensation) |
| Drop Specification | Multiple drops to a concrete floor from a height of 1.5m |
| Roller Drop Specification | 500 times of roller drops from a height of 0.5 meters |
| Ingress Protection | IP65 |
| ESD Protection | ±15KV (air discharge), ±8KV (contact discharge) |
Scanning Engine
| Barcode Type | It can scan one-dimensional / two–dimensional barcodes |
| Scanning Accuracy | ≧3.33mil |
| Scanning Angle | Pitch: ±60°； Skew：±45°； Tilt：360° |
| View Angle | Horizontal：44.3°，Vertical：28.4°，Diagonal：51° |
| Motion Error Tolerance | 8m/s |
Communication Transmission
| WWAN (Network Frequency) | China & Eurasian version: 2G: B2/B3/B5/B8 3G: WCDMA: B1/B5/B8, CDMA&EVDO: BC0, TD-SCDMA: B34/B39 4G: FDD-LTE: B1/B3/B5/B7/B8/B20，TDD-LTE: B34/B38/B39/B40/B41 |
| WWAN (Data Service) | GSM/GPRS/EDGE/CDMA/UMTS/HSPA/HSPA+/EVDO /WCDMA/TD-SCDMA/TDD-LTE/FDD-LTE |
| WLAN Function | Wi-Fi 802.11a/b/g/n/r/ac (2.4G + 5G dual-band Wi-Fi), support Wi-Fi 5G PA amplifier |
| Bluetooth | Bluetooth 5.0 |
| GPS | GPS/AGPS/BDS/Galileo/GLONASS/QZSS |
Communication Interface
| USB Interface | Type-C (with headset function) *1 |
| OTG Interface | Support |
Development Support
| Programming Language | Java |
| Development API | iScan API (Scanning Development Kits), Device API (Device Management/Configuration Development Kits), Android Standard Interface |
| Development Tool | Eclipse/Android Studio |
iData is an IoT device manufacturer that leads the world in smart hardware innovation.
In line with the core value of “Helping customers succeed.”, iData provides excellent smart IoT devices for global workers and is committed to building a smart world with all things connected.
Together with thousands of partners around the world, iData covers more than 100 industry segments and is widely used in logistics, manufacturing, retail, health, and utilities. Through iData’s device, we can connect the software services of excellent partners in various industries, promote the digitalization, interconnection, and intellectualization of data acquisition, and ultimately create value for our customers.
ctto: https://www.idataglobal.com/intelligent-terminal/index.html
