Cisco: AIR-AP1815I-B-K9C brings a full slate of Cisco high-performance functionality to the enterprise environment.

Cisco Aironet 1815i offers wireless performance that leads the industry

With support for the most recent Wi-Fi standard, IEEE’s 802.11ac Wave 2, the Cisco Aironet 1815i offers wireless performance that leads the industry. A new generation of Wi-Fi clients, including high-performance laptops, tablets, and smartphones with integrated 802.11ac Wave 1 or Wave 2 capability, are now supported by the 1815i.

Features & benefits

MU-MIMO

Support for the most recent version of the Wi-Fi specification, known as IEEE 802.11ac Wave 2, helps the Cisco Aironet 1815i achieve wireless performance that is unmatched in the industry. The 1815i adds compatibility for a new generation of Wi-Fi clients, such as smartphones, tablets, and high-performance laptops. These devices must have integrated support for 802.11ac Wave 1 or Wave 2 to be compatible with the 1815i.

Cisco Mobility Express solution

Flexible deployment made possible by the Mobility Express solution is ideally suited for deployments of a small to medium scale. The 1815i’s straightforward configuration makes it suitable for use in networks that do not have a dedicated hardware controller.

Integrated Bluetooth 4.1

Integrated radio with Bluetooth low-energy version 4.1 (BLE) for use in location and asset tracking (future availability).

Increased wireless performance

The 1815i access point is compatible with the most recent version of the 802.11ac Wave 2 standard, which enables networks to have improved performance, greater access, and higher densities. This access point is equipped with simultaneous dual radios and dual band, as well as 802.11ac Wave 2 MU-MIMO technology. As a result, it is capable of managing the growing number of high-bandwidth devices that will soon be an integral part of the network.

Wired access

The 1815i provides wired connection using a single RJ-45 connector that has auto-detection for 10/100/1000 speeds. It is able to support all operation modes while utilizing power via PoE 802.3af.

Mounting

These sophisticated access points have a tiny form factor and are built with a variety of mounting options in mind for added versatility. You can install them horizontally or vertically on a wall or ceiling. In addition to that, they are simple to set up.

Specification

Authentication and security●  Advanced Encryption Standard (AES) for Wi-Fi Protected Access 3 (WPA3), WPA2, WPA●  802.1X, RADIUS Authentication, Authorization, and Accounting (AAA)●  802.11r●  802.11i
Software●  Cisco Unified Wireless Network Software with AireOS Wireless Controllers Release 8.3.112.0/83MR1 or later●  Cisco Mobility Express
Supported WLAN controllers●  Cisco 2500 Series Wireless Controllers, Cisco 3500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Catalyst ® 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex ® 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco 9800 series Wireless Controllers.●  Cisco Mobility Express
Maximum clients●  Maximum number of associated wireless clients: 200 per Wi-Fi radio, in total 400 clients per access point
802.11ac●  2×2 single-user/multiuser MIMO with two spatial streams●  Maximal Ratio Combining (MRC)●  20-, 40- and 80-MHz channels●  PHY data rates up to 866.7 Mbps (80 MHz on 5 GHz)●  Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Rx)●  802.11 Dynamic Frequency Selection (DFS)●  Cyclic Shift Diversity (CSD) support
Ethernet ports●  Authentication with 802.1X or MAC filtered●  Dynamic VLAN or per port●  Traffic locally switched or tunneled back to wireless LAN controller
Bluetooth (future availability)●  Integrated Bluetooth 4.1 (including BLE) radio●  Maximum transmit power: 4 dBm●  Antenna gain: 2 dBi

Indicators●  Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
Dimensions (W x L x H)●  Access point (without mounting bracket): 6 x 6 x 1.3 in (150.8 x 150.8 x 33 mm)
Weight●  Access point without mounting bracket or any other accessories: 14 oz (400 g)
Environmental●  Operating◦  Temperature: 32° to 104°F (0° to 40°C)◦  Humidity: 10% to 90% (noncondensing)◦  Max. altitude: 9843 ft (3000 m) @ 40°C●  Nonoperating (storage and transportation)◦  Temperature: -22° to 158°F (-30° to 70°C)◦  Humidity: 10% to 90% (noncondensing)◦  Max. altitude: 15,000 ft (4500 m) @ 25°C
System●  1 GB DRAM●  256 MB flash●  710 MHz quad core
Input power requirements●  Power injector: AIR-PWRINJ5= or AIR-PWRINJ6=
Powering options●  802.3af/at Ethernet switch●  Optional Cisco power injectors (AIR-PWRINJ5=, AIR-PWRINJ6=)
Power draw●  8.3W (maximum, on PoE)
Physical security●  Torx security screw, included with the access point
Mounting●  Included with the access point: mounting bracket AIR-AP-BRACKET8

In recent years, business customers have increasingly favored wireless access as the method of network connectivity due to the convenience it provides. Alongside this transition, there is an expectation that wifi should not impede the day-to-day work of users, but rather should offer a high-performance experience while enabling users the freedom to move about as they like. The 1815i offers an end-user experience that is robust in terms of mobility and possesses industry-leading performance for establishing wireless connections that are both extremely secure and reliable.

ctto: https://www.cisco.com/c/en/us/products/collateral/wireless/aironet-1815-series-access-points/datasheet-c78-738243.html

You may also like:

Verified by MonsterInsights